home→Recipes→ Headband with roses from ribbons. Headband of roses master class

Headband with roses from ribbons. Headband of roses master class

An elegant and delicate headband decorated with roses will make the female look more romantic. In the master class below, we will show you how to make such an ornament. DIY rose headbands are very easy to make. The item is decorated with 19 roses and a satin ribbon braid. Consider how to make such an ornament and what you need to make it.

What do you need for a headband with roses?

To decorate the rim you need to purchase:

pieces of satin ribbon of light and dark green color (width 6 mm, length 2 m);
bezel (plastic or metal) with teeth (width 2-3 cm);
pink ribbon (width 2.5 cm - 8 m);
green satin ribbon ((width 2.5 cm - 2 m);
device for burning wood;
thermal gun.

We braid the bezel with a pigtail

At the ends of two satin green ribbons, we form loops with glue. The width of the loop should be such that another tape can easily enter it and you can weave a pigtail. We insert one tape into the loop of the second.
Further, at the very fastening of these two blanks, we bend the tape and insert it into a free loop, slightly stretching the tip.
Thus, we continue chess weaving, alternating dark and light ribbons.
When the pigtail of sufficient length is ready, we insert the opposite tape into the last loop, without forming a new loop.

Creating roses

To create roses, cut off from a pink ribbon, the width of which is 2.5 cm, 133 pieces (length 6 cm). One rosette - 7 petals.
In order to get petals from segments of the tape, we bend the side upper corners of the rectangles down, placing them horizontally. The result is triangles, they should be located on the front side, and the middle - on the wrong side.
Further, in the resulting blanks, we bend the sharp corners vertically, making sure that the ends are docked with the place where the corners of the rectangle are attached. Thus, we prepare all segments of the pink satin ribbon.
We twist the first petal into a tube and glue it, forming the middle of the bud.
On the resulting middle tube, we glue the remaining six petals in turn, forming a rose.
We form the required number of buds.
Next, we prepare 19 segments of a green ribbon 2.5 cm wide. For sepals, their length is 10 cm. We bend each segment in half and pass the tip of the heated burner diagonally. We divide into two right-angled triangles each in half a bent tape.
For the sepals, we will use the part of the ribbon where the fold was. We will open the resulting corner, its shape should be in the form of a paper bag for sweets.
We make 19 green blanks, the number of buds will be the same.
We place the roses in the opened green petals, having previously dripped glue on them.
We glue the pigtail on the rim.
After the glue has dried and the pigtail is firmly attached to the rim, we glue our roses on the pigtail, arranging the details in a herringbone pattern.
We place all the details on the rim. If you want the bouquet to be denser, increase the number of roses to 21 pieces.

Our beautiful, romantic hairband with delicate roses is ready. It is not difficult to make it. All you need is a headband, roses, ribbons and a little patience.

A variant of making a headband with delicate foamiran roses

Foamiran is an artificial material, it is also called plastic suede. This material is used for various decorations. You can buy it in specialized stores for needlework and in online stores. So, let's look at how to make such a bezel with roses with your own hands.

What will be needed?

Materials and tools needed to make a headband with foamiran roses:

foamiran green;
lighter;
foamiran dark and light;
wet wipes;
foil;
glue gun;
sharp scissors;
40 cm lace and thick fabric;
bezel 2-3 cm wide.

Making a bezel

Before you start making a headband with roses from foamiran, consider some tips:

Initially, you need to draw flower patterns. The basis for the roses will be a narrowed oval (size 14 by 5.5 cm). Petals of two sizes will be needed. You will get three petals together in a circle with a diameter of 8 cm - 9 pieces, with a diameter of 6.5 cm - 10 pieces. You also need 8 petals in the form of a drop (3 x 3 cm).
Next, you need to make 8 leaves in the shape of a boat 4.5 by 2.5 cm and sepals in two sizes - 5 and 7 cm.

Now let's move on to making flowers.

From dense fabric we cut out two identical ovals. On one of them we make notches to put it on the rim. Glue the second oval to the bottom of the rim, thereby covering the bottom.
Next, cut out the blanks from foamiran according to the templates. One large flower needs three petals, and for small roses we will take two. In buds, two blanks are needed.
Cut out the sepals according to the pattern.
We tint the petals with the help of pastels. The sepals are tinted with pastel blue or any other color.
To give the sepals and petals a natural shape, you need to twist and stretch each of them, then make a groove on all the petals with your thumbs.
We twist foil balls, about the size of a pea, to make centers for roses
Now we collect first large roses, then small ones. We glue the petals sequentially with a glue gun.
When both the buds and roses are collected, we stick them on the rim, on the fabric base, which we previously prepared. Glue lace along the edge of the base. We arrange the roses the way you like, including fantasy.

The headband with roses is ready. Using your imagination, a little time and desire, you can get an original and delicate jewelry that you can complement your image with or give to your daughter or girlfriend.

If the task is to make the image romantic, then an elegant headband decorated with delicate roses will do. A master class on making such an ornament is given below. The jewelry is decorated with 19 roses and a bright green braid made of satin ribbons. Now more about what is needed to make such a product and how to make it:

Materials for decorating the rim:

satin ribbon of light green and dark green colors 0.6 cm wide - segments 2 m long;
a narrow metal or plastic bezel with teeth;
pink satin ribbon 2.5 cm wide - 7.98 m;
green satin ribbon 2.5 cm wide - 1.9 m;
cautery on wood;
thermal gun.

How to braid the headband with ribbons and decorate with small kanzashi roses:

Cut off a thin ribbon of two colors. Loops must be formed at the ends of each segment. The width of the loop should barely exceed 0.6 cm (so that the tape itself used easily enters into it). Insert one of the ribbons into the loop of the second.
Next, fold the tape in half at the very fastening of the two blanks and insert it into the free loop, slightly stretching the tip.
Continue chess weaving, alternating either light or dark ribbon.
Having formed a pigtail of sufficient length, finish weaving. In the last loop, simply insert the opposite tape without forming a new loop.
One rosette will consist of 7 petals. Cut 133 pieces of 6 cm long from the pink ribbon 2.5 cm for a complete decoration of the rim.
To get petals from segments, bend the top side corners down, placing the rectangles horizontally. Triangles should be the front side, the middle, respectively, the wrong side.
In the resulting blanks, bend the sharp corners vertically, joining the ends with the place where the corners of the rectangle are attached. Prepare all pink segments in the same way.
Twist the first petal into a tube and glue it - this will be the middle of the bud.
Next, glue the remaining 6 petals onto the middle tube in stages, forming a rosette.
Make the required number of buds. The number of roses can be increased if there is a desire to place them more densely.
For the sepals, prepare 19 pieces of green tape 2.5 cm, the length of which is 10 cm. Bend each piece in half, go diagonally with the tip of the hot burner. Each tape folded in half should be divided into 2 right triangles.
For the sepals, the part of the tape where the fold was will be used. Open the resulting corner, its shape will resemble a paper candy bag.
We decorate the headband with roses
Make 19 green blanks, the same number of buds will be used. Insert roses into the opened green corners, after dripping with glue.
Glue the braid onto the hoop.
Glue the flowers onto the braided headband, arranging the details in a herringbone pattern. First, drip glue on the narrow part of the green corner, and then press it with your finger.
Place all the details in a circle. If you want to compact the bouquet, then the number of roses will have to be increased to 21 pieces.

A romantic decoration - a hairband decorated with delicate small roses is ready. In the same way, you can make an accessory with yellow, white, scarlet roses or a multi-colored headband.

Shared the master class

Svetlana Sorokina

Such an unusual decoration can be created by one's own efforts only armed with the necessary material and, of course, patience. You can give such a headband to a friend, wear it with a bright summer dress, make it for your daughter.
So, we need:

1. Satin ribbon in different colors and different widths.
2. Scissors
3. Matches or lighter (for melting the edges of the tape)
4. Glue.
5. Bezel.

You can start.

First, let's prepare roses for our rim. This can be done in different ways. I'll tell you about the easiest way.
1. Using only tape, glue and your own sleight of hand. At first, the ribbon may unravel several times, turning from a twisted rosette into the same ribbon.
To prevent this from happening, it is better to take a rigid tape.

start twisting the edge of the tape
Looks like this:

This is the middle of our flower
We take and bend the tape
It turned out such a corner
We twist it around the circumference of the middle

Again we bend the tape and press it from below and so on until the rose "blooms", this is the wrong side - we melt the edge of the satin ribbon and glue it. This is the “front side” with our hands, we will align the flower, spreading the petals.

2. We tightly wrap a green satin ribbon around the rim.

She will hold roses and at the same time be the background, creating the effect of leaves. Now we sew roses to the wound ribbon.

You can create roses of different sizes and sew them in several rows - large, small, or make roses of the same size and sew them in one row, creating a thin rim. It all depends on your taste, the length of the hair on which the headband will "sit". I made one row of flowers, diluting it with larger roses in places.

Hello everyone, today we continue to make beautiful things with our own hands. A very interesting and unusual headband was made by Christina Rubina and shared the manufacturing process with us. The headband is made very quickly, and in the end you will get a beautiful, fashionable headband of roses. Now headbands, wreaths are in fashion, so any fashionista will want to have such beauty in herself. Well, let's start making a rim of roses.

To make a headband of roses you will need:

* Satin ribbon 5 cm wide.
* Scissors.
* Lighter or candle.
* Threads (should be close in color to the tape).
* Needle.
* Tweezers.

How to make a rose headband:
First we need to make roses. To do this, cut off 5 cm from the tape (so that we get a square) and melt its edges.

Then fold the square diagonally into a triangle.

We fold the corners and get such a pretty petal for making our roses.

Cut off the bottom edge as shown in the photo and melt it so that the edges do not fray. In order not to burn your fingers on the melted tape, it is better to use tweezers. We clamp the desired place with tweezers and melt.

Now we will sew our petals. They can be glued, but Kristina likes to sew them more, it seems to her that this way they turn out to be more alive. The petals are strongly pulled together by a thread and this way it turns out more interesting. We choose threads of a color close to the soldering of our satin ribbon.

This is how the back side will look like.

Rosettes for the rim are ready. The size and splendor of the flower depends on the number of petals used. Therefore, make them at your discretion, as much as you think you need.

We glue our finished roses to the rim and this is what we got from green roses)

In conclusion, I want to show you a few more master classes on making headbands with your own hands.

If you wish, you can join the Christening group - https://vk.com/atlasnye_cvety

Foamiran is an innovative artificial material, which is also called plastic suede. It is used for various decorations and, in particular, for headbands.

Due to their properties, needlewomen can create different things. Namely: decorative crafts, jewelry, dolls and much more. In this article, we will talk about hair bands, which are decorated with incredibly beautiful flowers made of foamiran. Several master classes will be presented, one of which will appeal to a skilled craftswoman.

In order to make a headband with foamiran flowers, you need to prepare the following materials and tools:

Plastic suede dark and light;
Foamiran green;
Lighter;
Pastel dry red and blue;
Wet wipes;
Glue gun;
Foil;
Scissors;
Thick fabric;
40cm lace;
Headband.

A master class on making an original head ornament is not difficult.

It looks like this:

The first step is to draw patterns. The base of the flowers should resemble a narrowed oval measuring 14 by 5.5 cm. For roses, petals of 2 sizes will be needed. They look like 3 petals together but in a circle. Diameter 8 cm - 9 pieces, 6.5 cm - 10 pieces. You will also need 8 teardrop-shaped petals, the size of which is 3 by 3 cm.
The leaves of the flowers will have the shape of a boat 4.5 by 2.5 cm. The leaves must be made 8 pieces. Sepals must be made in 2 sizes - 7 cm and 5 cm.
You have to start from the basics. From dense fabric it is necessary to cut 2 identical ovals. On one oval, you need to make notches to put it on the rim. The second oval should cover the lower part by gluing it.
Next, from the foamiran, it is necessary to cut out the blank templates. For 1 large flower, 3 petals are needed, and for small roses, 2 will be taken. But in buds, 2 blanks are needed.
Then, also according to the template, you need to cut the sepals.
The next step is to use pastels to tone the petals. The sepals are also tinted, but only with blue pastel.
Now we need to give the petals a natural shape. Each must be twisted and stretched, and then make a recess with the thumbs. The same must be done with the sepals.
The centers for roses are made of foil. You have to roll the balls.
Next, you need to collect first large roses, then small ones. All petals are glued sequentially with a glue gun.
After the buds and roses are collected, they must be glued to the rim, to the fabric base. Lace should be glued along the edge of the base. Roses should be arranged as you like.

That's a little time, effort and desire, and you can get an original piece of jewelry that you can give to your daughter or girlfriend.

How to make small foamiran roses for the rim yourself

You can make small foamiran roses with your own hands, they will decorate the rim, and it, in turn, will complement a beautiful outfit.

To make a headband, you need to prepare:

Foamiran green and orange;
headband;
Glue gun;
Scissors;
Lighter;
Satin ribbon 1x40 cm;
Lace;
Thick fabric;
Foil;
Toothpicks.

The first step is to draw templates. Roses will be 6 - 3 large and 3 small, a few buds. Each rose has 3 petals. One blank looks like a pyramid of 3 balls, 5.5 cm in diameter, small - 5 cm. Such petals will need 12 of each size.

It is necessary to make substrates 5 cm in size and 6 pieces in the shape of an uneven star. The base must be made of dense fabric, in the form of an oval, as in the previous master class. Next, you need to prepare the rim. First of all, we wrap it with a satin ribbon at an angle, but not the entire rim, but 2/3 of the part. Then you need to fix the base, and attach lace along the edge of the rim. The petals are made from orange foamiran, and the substrate from green.

Small buds will be made from the remnants of plastic suede.

The next step is to give the petals a natural shape, this is done by twisting, squeezing and stretching. The edge is tinted and heated with a lighter, so it will twist, and the petals will look more alive. When the sepals and petals are ready, they must be collected into roses. We make the middle of the foil, it is necessary to twist the ball. Finished roses must be fixed to the base. The elegant bezel is ready.

We make a bezel from foamiran for roses: little tricks

Winter is the perfect time to get creative.

To make a headband with roses, you need to prepare:

Cardboard;
Foamiran pink or peach;
Foamiran green;
Art pastel pink;
Water;
Sponge;
Iron;
Thick fabric;
Lace;
Glue gun;
Rim.

First of all, you need to make templates, draw teardrop-shaped petals on cardboard, 2x1.5 cm in size and a sepal. One rosette will consist of petals. The required number of petals must be circled with a toothpick and cut out. Next, proceed to tinting with pastels.

It is necessary to tint the edge on both sides, shading with a sponge. On the sepals it is necessary to make notches with scissors.

The next step is to give the petals and sepals a natural shape. The blanks are heated on an iron and stretched, twisted, compressed. Then we start assembling flowers. Roses are wound on glue in a circle. The sepal is glued last. Next, you need to prepare the rim, fix the base, decorate with lace, glue the roses as you like, and the magnificent decoration is ready.

How and how to firmly fix a foamiran rose on the rim

Foamiran roses can be mounted on a textile base or on a wire, decorating the rim with a ribbon.

Various hairpins and headbands with flowers are now in trend. They are worn by girls, women, even older ladies.

Such a product will help out at any solemn event or photo shoot.

The outfit will immediately become:

touching;
Feminine;
Festive.

Buying a headband with flowers is quite expensive, and it is not always possible to find a model that matches the outfit and hairstyle. It is much more interesting and pleasant to create it yourself. The bezel can be metal or plastic, wide or thin, as you like. Then you need to create roses from plastic suede, any size you like. Flowers are arranged on the rim with a glue gun. If the rim is thin, and it is planned to glue the roses on hot glue, then it is better to sand the surface. It is good to glue roses on very wide rims. A matter of taste of the needlewoman.

How to make a headband with foamiran roses (video)

A little imagination, effort and good mood, and as a result you can get a beautiful product that is useful for yourself or as a present to a loved one. It is not necessary to be a professional needlewoman, starting with simple crafts, having practiced, as a result, you can gain experience and make real works of art.